Question:* Inventor was primarily created for modeling and analysis of:
Answer: • Mechanical parts
Question:* The ______ specifies which add-ins to load at startup.
Answer: • Add in Manager
Question:* True or False? Setting a subassembly as "phantom" prevents it from being listed in the bill of materials while still allowing the parts contained within the subassembly to be listed.
Answer: • True
Question:* What is the extension for an assembly file?
Answer: • .iam
Question:* What is the purpose of the view cube?
Answer: • It provides quick access to standard and isometric views
Question:* What is the basic file type of Inventor?
Answer: • Part file
Question:* What term describes testing how an object will react under real world stress (weight, torque, etc.)?
Answer: • Dynamic Simulation
Question:* What is the extension of a part file?
Answer: • .ipt
Question:* True or false? A 2D sketch is the first step of the parametric modeling process.
Answer: • True
Question:* True or false? Drawing files can contain: sheet formats, title blocks, borders, and sketched blocks.
Answer: • True
Question:* A 3D Sketch provides the ability to produce geometry that is the result of:
Answer: • All of these
Question:* To render and animate, you should use ________.
Answer: • Inventor Studio
Question:* You would use the fillet feature to ________.
Answer: • round off or cap corners
Question:* You use this tool to measure the space between components in an assembly :
Answer: • Measure.
Question:* True or false? Editing a component in assembly, it modifies all instances of the component in its source file and in other assemblies.
Answer: • True
Question:* A design layout is a ______ drawing.
Answer: • 2D
Question:* The Hole command will build a hole at:
Answer: • All of these
Question:* The ______ command creates a copy of sketch across an axis.
Answer: • mirror
Question:* The Project Geometry command copies to the current sketch:
Answer: • All of these
Question:* Which of the following is the file extension for an Inventor drawing?
Answer: • .idw
Question:* What does FEA stand for?
Answer: • Finite Element Analysis
Question:* A feature that adds depth to a sketch is called a/an __________ feature.
Answer: • extruding
Question:* If you transfer a file from SolidWorks to Autodesk Inventor, you most likely will save it as a ______ file.
Answer: • STEP
Question:* True of false? If your model fails a stress analysis it will create an exploded view
Answer: • False
Question:* Presentations are saved as _____ files.
Answer: • .ipn
Question:* In a drawing, the first view created is the:
Answer: • Base view
Question:* A loop refers to a _________.
Answer: • closed sketch
Question:* In a multiuser environment, Inventor's primary means for organizing data, including files, libraries, and revision control is a:
Answer: • Vault project
Question:* Where will you change the units for a part or assembly.
Answer: • tools - document settings - units
Question:* True or False? Within Inventor a 'drawing' is 2D.
Answer: • True
Question:* In an assembly, what constraint would provide the quickest means to constrain a bolt to a hole?
Answer: • Insert
Question:* How do you create a tank cone
Answer: • combining sketch straight length and knuckle radius and revolve at the vertical center line
Question:* In an assembly, what is the maximum degrees of freedom a component can have?
Answer: • 6
Question:* What does HUD stand for?
Answer: • Heads-Up-Display
Question:* To analyze characteristics of an assembly in motion, you would use _______.
Answer: • Dynamic Simulation
Question:* Autodesk Inventor modules don't include:
Answer: • Plant layout
Question:* Replace All will replace each occurrence in:
Answer: • an assembly document.
Question:* What is the default Extents option for the Extrude command?
Answer: • Distance
Question:* Constraint inference and persistence:
Answer: • Can be switched on and off
Question:* Which of the following lists contains only sketch based features?
Answer: • Extrude, Revolve, Loft, Sweep, Coil
Question:* To constrain components together without using a dialog box or on placement use:
Answer: • the Assemble command.
Question:* You can create Inventor presentation files by opening a new file with the _____ extension.
Answer: • .ipn
Question:* Precise input allows the user to:
Answer: • Manually enter specific point coordinates
Question:* When creating a drawing view, Tangent Edges:
Answer: • Can be shown from the view display option window
Question:* True or False? Part Files hold together Assembly Files.
Answer: • False
Question:* On the Ribbon, View tab, where would you find the command for visual styles?
Answer: • In the Appearance panel.
Question:* The coordinate system of a sketch:
Answer: • Can be modified
Question:* To join axes you would likely use a _______ constraint.
Answer: • mate
Question:* The Loft command will create a loft using:
Answer: • All of these
Question:* In an Assembly, what constraint would you use to align two part faces so that their direction arrows are parallel?
Answer: • Mate with a Solution of Flush
Question:* To specify motion of gears, you would use a _______ constraint.
Answer: • rotation
Question:* Copying a feature from a part and storing it in a feature file is called __________.
Answer: • extraction
Question:* A ________ constraint error occurs when a component is constrained in a position but subsequent modifications are made to a constrained part.
Answer: • geometry missing
Question:* What is the purpose of making parts and assemblies adaptive?
Answer: • It provides for cross part relationships
Question:* True or False? Ribs add support to a component by changing its main shape.
Answer: • False
Question:* You could use a _______ file to create an exploded view.
Answer: • .ipn
Question:* To make sure that your parts do not intersect unrealistically, you would use the _________.
Answer: • Contact Solver
Question:* Which would you use to constrain a line to the center of a circle?
Answer: • Coincident constraint
Question:* The _______ feature can blend dissimilar 2D sketches on nonintersecting planes.
Answer: • loft
Question:* What environment is used when a solid is edited through the Edit Form command?
Answer: • Fusion
Question:* When you create a Virtual Component in place, you must:
Answer: • select from the BOM Structure list.
Question:* In a drawing, you can add a dimension to the intersection point of two lines by:
Answer: • Selecting: the first line, right click, intersection, then select the second line
Question:* To create a sub-assembly from components in an existing assembly:
Answer: • You demote the components
Question:* Using Design Accelerator you can design:
Answer: • Plastic injection products
Question:* What tool do you use to change the default color of materials?
Answer: • Color Override
Question:* All of these items are located in the Representations folder EXCEPT :
Answer: • Browser Folder.
Question:* Setting the 1st angle and 3rd angle projections as defaults for a template can be done using:
Answer: • Styles editor
Question:* What sub menu tool tab is used for repairing and stitching surfaces and solids?
Answer: • Construction
Question:* Which of the following is NOT used to calculate distortion?
Answer: • Material rigidity
No comments:
Post a Comment