Question:* Which of the following file types does Rhino typically operate in by default?
Answer: • .3dm
Question:* How many lines/polylines may be used to complete the 'Loft' command?
Answer: • Unlimited
Question:* What Item would decrease the file size in saving process while keeping objects and file properties?
Answer: • Save small
Question:* Which Viewport shows the orthographic projection of the Rhino model on the x-y plane?
Answer: • Top
Question:* What is the difference between the commands "Sweep1" and "Sweep2"
Answer: • "Sweep2" uses two rails and "Sweep1" uses one
Question:* Which of the following is true about Mesh and Nurbs Surfaces?
Answer: • NURBS surfaces can be converted to Meshes, but not back into NURBS.
Question:* What does the "ShowEdges" command do?
Answer: • It shows all edges and highlights naked edges of selected objects
Question:* What constitutes a "Curve" in Rhino?
Answer: • Any kind of Line
Question:* What does the rebuild tool do?
Answer: • It allows a user to redefine an object's degree and point count
Question:* Which command should you use if you want to copy, move, rotate, and scale an object?
Answer: • Orient
Question:* What is the quickest command to create a series of 20 equally spaced parallel lines?
Answer: • array
Question:* Which of the following is not an option to create a circle?
Answer: • Perpendicular
Question:* NURBS objects can be turned into meshes through which toolbar?
Answer: • The mesh toolbar
Question:* Which of the following display options does not show curves?
Answer: • Render
Question:* What is a "Naked Edge"
Answer: • An edge that is not completely joined to another edge
Question:* Which of the follow methods can be used to create a circle?
Answer: • All of them
Question:* Which of the following is a curve?
Answer: • All of these
Question:* Which symbol in the layers window shows if a layer is on or off?
Answer: • The lightbulb
Question:* Which command creates a 2-D line drawings from a 3-D model?
Answer: • Make2D
Question:* What plane does the "Countour" command output in?
Answer: • The user inputs the normal to the desired plane.
Question:* Which of the following viewport options is NOT available?
Answer: • Lines
Question:* What command would you use to subtract one solid object from another?
Answer: • Difference
Question:* To combine multiple curves into one, use:
Answer: • Join
Question:* What is the term for downloaded third-party software that add specific abilities or functions?
Answer: • Plug-ins
Question:* What are the main types of Objects used in Rhino?
Answer: • Curves, Surfaces, Polysurfaces and Meshes.
Question:* Which of these is a rendering plugin for Rhino?
Answer: • Flamingo
Question:* Which of the following commands shows information about selected Objects?
Answer: • Properties
Question:* Which command is used to join 2 or more lines?
Answer: • join
Question:* The CPlane may be set to all of the following except:
Answer: • It may be set to all of these.
Question:* The command "PointsOn" does which of the following?
Answer: • Reveals the controls points of a specified object
Question:* What does the "Snap" command do?
Answer: • It toggles a lock-on to the default grid of the Rhino document model
Question:* What command would you use to change the Number of control points on a surface?
Answer: • Rebuild
Question:* Which Viewport does the output from Make2D go?
Answer: • Top
Question:* Which of the following shapes does not have a command to construct it?
Answer: • Hyperboloid
Question:* What does the "Project" option in the "Osnap" panel do?
Answer: • It projects any line drawn to the plane of the projection viewport
Question:* You can join two solids through which of the following commands?
Answer: • union
Question:* What of the following is the default to "Pan" across a viewport?
Answer: • Shift and the Right Mouse Button
Question:* What does the 'chamfer' command do?
Answer: • Connects two curves by extending or triming them to intersect or to join with the beveled line.
Question:* What kind of plugin is Grasshopper?
Answer: • It is a parametric visual programming language
Question:* What is one way that "Group" is different than "Join"
Answer: • Group always retains the different layers of the objects selected.
Question:* What is the difference between the "Snap" command and the "OSnap" command?
Answer: • The "Snap" command locks to the grid of the document and "Osnap" locks to objects in the model
Question:* What does the "Explode" command do?
Answer: • It breaks apart a selected polyline or polysurface into individual curves and surfaces
Question:* How is the "BooleanUnion" command different from the "Join" command?
Answer: • The "BooleanUnion" command is for uniting closed polysurfaces and "Join" is for curves, surfaces and polysurfaces
Question:* At what angle does the "Fillet" command command two lines?
Answer: • Tangent to the circle whose radius is defined by the user
Question:* In perspective view which of the following actions will allow you to pan across the view?
Answer: • right click + shift
Question:* Which of the following commands CANNOT be used to create a surface?
Answer: • 3points
Question:* Which version of Rhinoceros is able to import sketchup files?
Answer: • 4
Question:* In what increments can the degrees in "Ortho" be set to?
Answer: • Any degree the user chooses
Question:* Hot-key for disabling Osnap:
Answer: • Alt key
Question:* How does the "Curve" command work?
Answer: • It creates a NURBS Curve from control points
Question:* Which is the most appropriate Zoom Command to focus entirely on a single object in a single viewport?
Answer: • ZS
Question:* What does the "SrfPt" command do?
Answer: • It creates a surface from 3-4 points
Question:* Which of the following file types is NOT available in the 'save as' menu?
Answer: • .skp
Question:* What does the "Points" option in the "Osnap" panel do?
Answer: • It allows Snapping to defined object "Points"
Question:* What is the command to turn off the default blue to gray gradient background?
Answer: • GradientView
Question:* Which command helps to align unarranged Points in a planar situation?
Answer: • Set xyz coordinate
Question:* What is the difference between a Control Point and a Knot?
Answer: • A control point is the actual point defining a NURBS line or surface, a knot describes the quality of that point
Question:* Which hot-key constrains the cursor Direction?
Answer: • Tab key
Question:* The ChangeDegree command will
Answer: • add or subtract control points between each knot span
Question:* Which command will allow you to import a .bmp file which can be edited as an object?
Answer: • PictureFrame
Question:* The term NURBS stands for which of the following?
Answer: • Non-Uniform Rational Basis Spline
Question:* If the tolerance between two surfaces is too great for the "Join" command, what command can join the edges of those surfaces?
Answer: • JoinEdge
Question:* The "InsertKnot" command does which of the following?
Answer: • All of these.
Question:* What kind of Loop can't Grasshopper achieve?
Answer: • Recursive Loops
Question:* What, by default, are the elements of a "Leader"?
Answer: • An arrow, a curve and a text box
Question:* How does the "InterpCurve" command work?
Answer: • It creates a line that runs smoothly through a series of points
Question:* What is the difference bithween tools control points on and edit points on?
Answer: • It's inpossible delete points when we use edit points on.
Question:* What does the "Silhouette" command do?
Answer: • It generates a wireframe curve set of the objects selected
Question:* The "Divide" command does what in Rhino?
Answer: • Adds division points on a line based on Length or Number.
Question:* The dimensions of an object can be measured WITHOUT being drawn using the _________ toolbar.
Answer: • Analyze
Question:* Typing "L" into the command prompt brings up which command?
Answer: • Lasso
Question:* What is the best command for measuring exact maximum and minimum distance between 2 coplanar curves?
Answer: • Analyze Curve Deviation
Question:* What degree curve is a circle?
Answer: • 2
Question:* What typed command allows for surface creation between 2, 3, or 4 curves only?
Answer: • EdgeSrf
Question:* What command enables you to edit the points on a polysurface?
Answer: • Typing 'SolidPtOn'
Question:* What is the relationship between the Ctrl+C and "Copy" command?
Answer: • The Copy command targets any point and the Ctrl+C command copies from the origin point
Question:* What breaks the Cage capability of a "CageEdit"?
Answer: • Moving the object
No comments:
Post a Comment