Question:* The most common way to secure a wireless connection is to use:
Answer: • WEP
Question:* WPA stands for:
Answer: • Wifi Protected Access
Question:* If a device that is rated at 40 milliwatts (mW) is added to a connector whose resistance reduces the power by 3 decibels (-3dB), what is most likely to be the device's power rating?
Answer: • 20 milliwatts (mW)
Question:* IEEE 802.11af allows WLAN operation within what two ITU-designated radio wave frequency ranges?
Answer: • VHF and UHF
Question:* Antenna gain is characterized by what unit of measurement?
Answer: • dBi or dBd
Question:* Which of the following is not one of the layers of the OSI networking model?
Answer: • Layer 5 - Security
Question:* One technique used in attempts to crack a cipher or authentification mechanism is to try hundreds, maybe millions of possible passwords or phrases. What is this technique called?
Answer: • a "dictionary attack"
Question:* IEEE 802.11i is also referred to as:
Answer: • WPA2
Question:* Which of the following can be effectively used to restrict unnecessary traffic on your wireless network?
Answer: • Firewall
Question:* Some wireless routers provide QoS to help prioritize traffic. What does QoS stand for?
Answer: • Quality of Service
Question:* The diameter of a hotspot area is about:
Answer: • 100-500 feet
Question:* In many cases municipal wifi networks are being created with a combination of:
Answer: • wimax and wifi
Question:* What does DNS stand for?
Answer: • Domain Name System
Question:* Which one is the most secure?
Answer: • WPA2
Question:* The radio waves of a WLAN are generated by which device?
Answer: • router
Question:* Which of the following ISM bands is likely to be the most heavily populated?
Answer: • 2.4 GHz
Question:* The wavelength of an electromagnetic signal is inversely proportional to what other feature of that signal?
Answer: • the signal's frequency
Question:* The Wired Equivalent Privacy (WEP) security algorithm was first introduced in 1997 by what professional association?
Answer: • IEEE
Question:* When you connect to a wireless network, you are assigned an IP address. What is an IP address?
Answer: • Internet Protocol address used to identify computers on the network
Question:* Wifi was built to move:
Answer: • data traffic
Question:* WPA2 increased the security of WPA from 128 bits to how many bits?
Answer: • 256 bits
Question:* What does AP stand for?
Answer: • access point
Question:* By using this type of wireless connection, you computer is secure from prying eyes:
Answer: • Encrypted
Question:* True or false? Wimax offers larger coverage areas with greater bandwidth and speeds compared to wifi.
Answer: • True
Question:* Wifi works on radio band:
Answer: • 802.11
Question:* Which of the following can redirect an Internet signal to multiple end users?
Answer: • router
Question:* Which of the following devices would definitely not use WiFi?
Answer: • (none of these)
Question:* Wifi is used to connect devices to:
Answer: • Internet
Question:* A specific location in which an end user can access the Internet wirelessly:
Answer: • access point
Question:* What does the W in WLAN stand for?
Answer: • wireless
Question:* What is the term assocaited with DHCP that allows your computer to acces other computers outside your network?
Answer: • Gateway
Question:* Which of the following may cause transmission interference with a wireless sign?
Answer: • (all of these)
Question:* Which frequencies does Wifi use to transmit data?
Answer: • radio
Question:* True or False? The more users that share an access point, the slower a wireless network can become.
Answer: • True
Question:* An IPaddress gets assigned to a computer by a wireless router. what performs this?
Answer: • DHCP
Question:* What does the term WLAN refer to?
Answer: • Wireless Local Area Network
Question:* What is the most basic difference between a WLAN and an Ethernet LAN?
Answer: • A WLAN uses radio waves, while a Ethernet LAN uses some form of cable.
Question:* When trying to connect to a wireless network, at times it's name is hidden. What is the technical term for this wireless name?
Answer: • SSID
Question:* Which of the following allows your computer to send and receive wireless signals to and from the internet?
Answer: • wireless network interface card
Question:* Which of the following is true?
Answer: • Wireless networks allow greater mobility than wired.
Question:* What do you call the name of a network that is broadcast by a router?
Answer: • SSID (service set identifier)
Question:* Wireless keys are:
Answer: • hexadecimal numbers
Question:* Wireless networks can operate on one of which two modes?
Answer: • ad hoc mode or infrastructure mode
Question:* Of the following choices, which 802.11 offers the highest potential speeds?
Answer: • 802.11n
Question:* What is the unique identifier tied to your wireless or wired ethernet card called?
Answer: • Media Access Control
Question:* The strength of a Wi-Fi wireless radio signal is measured using what standard unit?
Answer: • decibels (dB)
Question:* Which of the following security systems was marked as "deprecated," and therefore a security risk, in 2004?
Answer: • WEP
Question:* IEEE 802.11 wireless LAN use a media access control protocol called:
Answer: • Carrier Sense Multiple Access with Collision Detection
Question:* A decibel (dB) is a ratio determined by what two power quantities?
Answer: • signal and noise
Question:* Which of the following would an outdoor WLAN most likely require?
Answer: • attenas with a direct path for the signal
Question:* What do the letters DSSS stand for?
Answer: • Direct-Sequence Spread Spectrum
Question:* A wireless network card operates at roughly what rate of power?
Answer: • 1 mW
Question:* A typical off-the-shelf router (made by Netgear, Linksys, etc.) transmits with a power of roughly how many milliwatts?
Answer: • 20 to 30 mW
Question:* IEEE 802.1X security protocol uses which three components?
Answer: • supplicant, authenticator, authentication server
Question:* True or False? A WPAN will generally have a larger area of coverage than a WLAN.
Answer: • False
Question:* IEEE's 802.11 provides specifications for which two facets of WLAN communication?
Answer: • media access control (MAC) physical layer (PHY)
Question:* Which of the following refers to unauthorized tapping into another's wifi connection with a public utility?
Answer: • Piggybacking
Question:* Which of the following is not a feature WPA2 security?
Answer: • Penetration Detection Service (PDS)
Question:* What is it called when some drives around looking for available provate access points?
Answer: • Wardriving
Question:* Which of the following is not one of the three main tools used to decrease the security risks that accompany a WLAN?
Answer: • VIA protocol
Question:* The 2.4-GHz band is broken down into how many channels?
Answer: • 14
Question:* Which of the following is not an unlicensed ISM band?
Answer: • 150 MHz
Question:* What is the name given to individuals who search for unsecure networks in the hope of gaining free access to the internet?
Answer: • war drivers
Question:* Which of the following is not a common modulation method used in wireless communication?
Answer: • CAHS
Question:* What does EIRP stand for?
Answer: • Effective (or Equivalent) Isotropic Radiated Power
Question:* Which of the following frequencies would have the greatest penetration of potential sources of interferences such as walls or trees?
Answer: • 900 MHz
Question:* What is the name of a newer trend in which large mesh networks of wifi are provided over a large geographical area?
Answer: • Muni-wifi
Question:* An 802.11 frame may contain up to how many address fields?
Answer: • four
Question:* Wifi does not support roaming? True or False
Answer: • True
Question:* Wimax works on radio band:
Answer: • 802.16
Question:* Which of the following is not an organization that influences the standards used for WLANs today?
Answer: • World IWR
Question:* Which of the following keys is commonly used on wireless computer networks to increase their security?
Answer: • wireless
Question:* What is the fixed bandwidth defined by Wifi standard for 802.11g?
Answer: • 20MHz
Question:* What is the fixed bandwidth defined by Wifi standard for 802.11b?
Answer: • 25MHz
Question:* To prevent annoucement of the existence of your wireless network, you should disable identifier:
Answer: • annoucement
Question:* Wifi uses which kind of multiplexing:
Answer: • OFDM
Question:* IEEE 802.11 includes the specifications for WLAN technologies that make use of radio waves and what other kind of electromagnetic radiation?
Answer: • infrared
Question:* Quality of Service (QoS) capabilities are incorporated in Wifi with the adoption of:
Answer: • IEEE 802.11e standard
Question:* Which of the following modulation is used by Wifi?
Answer: • adaptive
No comments:
Post a Comment